Connecting a USB 3.0 Device
1.
Install any software required to operate the USB device(s). Refer to the documentation for the USB
device(s), as required.
2.
Connect the USB device to the device port on the Remote Extender. If you are using a USB3 Vision
compliant locking USB cable, then you can use the locking knobs to lock the cable to the port on the
Remote Extender.
3.
Check that the device is detected and installed properly in the operating system.
Installing the Remote Extender
1.
Place the Remote Extender near the USB device(s).
2.
Plug the power adapter into a suitable AC outlet.
3.
Connect the power adapter to the Remote Extender and twist the connector to lock the power
connector into the Remote Extender.
Installing the Local Extender
1.
Place the Local Extender near the computer.
2.
Connect the link cable to the Local Extender and the Remote Extender.
With Surface Cabling
• Plug one end of the fiber optic cabling (not included) into the Link port on the Local Extender.
• Plug the other end of the fiber optic cabling into the Link port on the Remote Extender.
With Premise Cabling
• Plug one end of a fiber optic patch cord (not included) into the Link port on the Local Extender.
• Plug the other end of the patch cord into the fiber optic information outlet near the host
computer.
• Plug one end of the 2
nd
fiber optic patch cord (not included) into the Link port on the Remote
Extender.
• Plug the other end of the 2
nd
patch cord into the fiber optic information outlet near the USB
device.
3.
Install the supplied USB 3.0 cable between the Local Extender and a USB 3.0 port on the host
computer.
CAUTION: The SP3022 will not operate on a USB 2.0 port; please ensure you connect to a USB 3.0
port. The USB 3.0 port will have a blue connector inside of it, whereas a USB 2.0 port will typically
have a black connector inside.
11
