3
charging
2.2 Power on/off
2.2.1 Power on:
Hold the MFB for 3 seconds until you see blue LED flashing to power on the device.
2.2.2 Power off:
In standby status, hold the MFB for 3 seconds until you see the red LED flashing to
power off the device.
2.3 Volume Adjust:
2.3.1 Volume Up: Press VOL+ once every time to adjust the volume
2.3.2 Volume Down: Press VOL- once every time to adjust the volume
2.4 Paired with and connecting
A.
When the device is in the off mode, press the on/off button for 5 seconds until the
red & blue LEDs flashing alternately, then enter pairing mode:
B.
Open Bluetooth function of your mobile phone or other device
C.
Connect
Setting your Bluetooth device
1.
Add or search device: when BT-125 appear, select it.
2.
Input password: 0000
2.5 Calling Operate
2.5.1 Calling
Answer the call: short press multifunction key to answer an incoming call.
Reject the call: press and hold the MFB for 2 seconds to reject the call.
End a call: After calling, short press multifunction key to end the call.
Redial: short press MFB twice to redial the last call.
Mute: Press VOL+ and VOL- to mute the MIC
Synchronous call: answer the other call, simply press the MFB.
2.5.2
Voice Dialing ( This function need the support of the mobile phone )
When in standby mode, short press the MFB and VOL+ then you hear note tone for
voice dialing.
3.Trouble Shooting
3.1 Volume is not high enough
3.1.1.Increase the volume of mobile phone/device or BT-125 volume
3.1.2.Ensure that the device has been charged
3.2 Hearing Distortion
