background image

1

ICR540IN D&N

 Dome Camera

INFORMATION  -

This  equipment  has  been  tested  and  found  to  comply  with

limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These  limits  are  designed  to  provide  reasonable  protection  against  harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance  with the instruction manual, may cause
harmful interference to radio communications.
Operation  of  this  equipment  in  a  residential  area  is  likely  to  cause  harmful
interference in which case the user will be required to correct the interference at
his own expense.

WARNING  -

Changes  or  modifications  not  expressly  approved  by  the

manufacturer could void the user’s authority to operate the equipment.

CAUTION :

To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than those specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and 

should conform to all local codes.  

The  lightning  flash  with  an  arrowhead  symbol,  within  an  equilateral
triangle  is  intended  to  alert  the  user  to  the  presence  of  uninsulated
dangerous  voltage  within  the  product's  enclosure  that  may  be  of
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the  user  to  the  presence  of  important  operating  and  maintenance
(servicing) instructions in the literature accompanying the appliance.

Содержание ICR540IN



















Отзывы: