15
DAY/NIGHT MODE
：
PHOTORESISTANCE
DAY/NIGHT TYPE : MECHANISM
DAY TIME
：
00H 00M
NIGHT TIME
：
00H 00M
SENSITIVITY
：
5
SAVE
BACK EXIT
WDR MODE
：
OFF
MOVEMENT COMP
:
OFF
BACK EXIT
Move the cursor to the item, click
“OK” button to display other exposure setting items.
SLOW SHUTTER: In lower illumination environment, you can lower the cameras auto exposure time to
capture the image and enhance the definition. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
AUTO SLOW SHUTTER LIMIT: it is to set auto slow shutter limit, click
“left”, “right” button to set.
AUTO GAIN LIMIT: It is to set auto gain limit, click
“left”, “right” button to set.
NOISE REDUCTION: There may be noise when the camera is monitoring the low illumination
environments. You can use the digital filter to process the noise to guarantee the clear video.
3D NOISE REDUCTION: It is to set the speed dome 3D noise reduction setup. There is the fourth menu.
Please move the cursor to highlight current item and then click the OK button to go to the next level
menu.
EXPOSURE RESTRAIN: It is to restrain the abrupt high light on the video in case it affects the video
quality. Please click the left/right button to set.
AE RECOVERY: Manually click the
“+” and “-“button on the PTZ interface, system cam resume
previous exposure value after specified time (The exposure value does not resume if this function is
off.).
WDR SETTING: It is an abbreviation for wide dynamic region. Please make sure your camera supports
current function. This function can adjust the video brightness when the contrast between the strong
light and the dark light is too high. There is the fourth menu. Please move the light to highlight current
item and then click the OK button to go to the next level menu.
BACK: Go back to previous menu.
EXIT: Log out system menu.
4.4.3.3
WDR
Move the cursor to WDR and then click confirm button, you can go to the 4-layer menu to set corresponding
parameters.
WDR MODE: It is to enable or disable WDR function. Please use the left/right button on the keyboard or
in the speed dome terminal menu to set.
MOVEMENT COMPENSATION
: it is to set the camera movement compensation, click the left and right
direction on the keyboard or the left and right button on the terminal menu to set
“on/off”.
BACK: Move the cursor to the item, click
“OK” button to go back to previous menu.
EXIT: Log out system menu.
4.4.3.4
Day/Night Setting
Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the 3-layer menu to
set corresponding parameters.
