ICRealtime ICIP-B2001-IR, Быстрый старт

Страница: 8 / 13

3
2 Device Installation
Note:
 The device installation steps may be different due to the different appearance and structure,
 Please make sure the installation surface can min support the 3X weight of the camera and
the bracket.
2.1 Install Device
Figure 2-1 Device installation 1
Please see Figure 2-1 and Figure 2-2.
Step 1
Stick installation map to designated surface where you will install the device (wall or ceiling).
Step 2
Dig a hole according to position of hole on installation map.
Step 3
Open accessories bag, take out expansion bolts and insert them into the hole you just dug.
Step 4
Open accessories bag, take out installation screws. Tighten the 4 screws to fix the device on the
installation surface (wall or ceiling). You can move device sunshade back and forth. When you
have fixed the device, you must tighten screws on sunshade.
Step 5
Plug external wiring of the device properly.