8
3
Device Installation
Important
Please make sure the installation surface can min support the 3X weight of the camera and the
bracket.
Figure 3-1
Please see Figure 3-1.
Step 1
Stick installation position map to designated surface where you will install the device
Step 2
Dig a hole according to position of hole on installation position map.
Step 3
Open accessories bag, take out expansion bolt and insert it into the hole you just dug.
Step 4
Open accessories bag, take out screws. Tighten the 3 screws to fix the device on the installation
surface where the bolts are located.
Step 5
Put the camera body into the installation bracket directly.
Step 6
Connect front-end lens to camera body by cable.
Содержание HD Pinhole
Страница 1: ...HD Pinhole Network Camera User s Manual Version 1 0 0 ...
Страница 11: ...6 Figure 2 3 Figure 2 4 Figure 2 5 ...
