5
Step 1
Before you install the bracket, please pull the cable through the cable exit of the bracket
chassis.
Please install the expansion bolt if you want to install in the cement wall (Please make
sure the installation holes of the expansion bolts are the same with the bracket.) Then you
can install the bracket. See Figure 3-2.
If you want to install in the wood surface, please skip the first step and then use the self-
tapping screws to install the bracket directly.
Step 2
Unscrew the M3
×
20 and M3
×
5 screws on the bracket in the direction shown in Figure 3-3,
adjust the camera to an exact location which needs to be monitored by rotating the bracket
and camera body, then secure the bolts.
Figure 3-3
Step 3
Connect the video output port of the device cable to the HDAVS DVR, and connect the power
port of the device cable to the power.
Step 4
After the image is shown on the HDAVS DVR, control the interface by HDAVS series DVR
PTZ, adjust lens zoom by using coaxial control, and the camera will auto focus to the best
position which makes the image clear. So far the camera installation is completed.
