iCraig CMB3215, Руководство пользователя

Страница: 14 / 18

1. Make sure the unit is in power off(standby ) mode before setting.
2. Press and hold the AL1 button until alarm 1 time and ( or or ) appears
3. Press / button on the unit or press the / button on the remote control to
set the wake up mode to buzz , radio , or iPod/iPone as desired.
4.
Press AL1 button again, the hour digits will blink.
5. Press the / button repeatedly to set the hour (Make sure the PM indicator appear
on the display if the alarm time is PM ).
6. Press the AL1 button again , the digits of the minute will blink.
7. Press / button on the unit or the / button on the remote control repeatedly
to set the minute.
8. Press the AL1 button again, volume level will appear on the display. Press the /
button repeatedly to set wake up sound level.
9. Press AL1 button to save the settings and exit.
Same as Alarm1 setting , but press AL2 button instead AL1 button.
- If radio selected, receive the desired stations as previous procedures before active alarm.
Otherwise when alarm goes off, no sound will be heard from the speaker.
- If iPod/ iPhone mode selected, make sure the iPod/iPhone is docked in the docking
properly. Otherwise, when alarm goes off, no sound will be heard from the speaker.
13
ALARM SETTING:
Alarm 1 setting
Alarm 2 setting
Important Notes:
on the display.
Meijer.com