ICPDAS MSM-6226G Скачать руководство пользователя страница 112

Страница: 112 / 251

policy

To configure LLDP-MED policy

Syntax

policy <

tagged/ untagged> <VLAN ID> < Layer2 priority> <DSCP value>

<guest-voice/ guest-voice-signaling/ softphone-voice/ streaming-video/

video-conferencing/ video-signaling/ voice/ voice-signaling>

Parameter

tagged

> The device is using tagged frames.

untagged

> The device is using untagged frames

VLAN ID

> VLAN ID, available value is from 1 to 4094.

L2 priority

> Layer 2 priority to be used for the specified

application type, available value is from 0 to 7.

DSCP value

> DSCP value to be used to provide Diffserv node behavior for the

specified application type as defined in IETF RFC 2474, available value is from 0

to 63.

guest-voice

> Guest Voice to support a separate limited feature-set voice

service for guest users and visitors with their own IP Telephony handsets and

other similar appliances supporting interactive voice services.

guest-voice-signaling

> Guest Voice Signaling (conditional) for use in

network topologies that require a different policy for the guest voice signaling

than for the guest voice media.

softphone-voice

> Softphone Voice for use by softphone applications on

typical data centric devices, such as PCs or laptops. This class of endpoints

frequently does not support multiple VLANs, if at all,and are typically configured

to use an untagged VLAN or a single tagged data specific VLAN.

streaming-video

> Streaming Video for use by broadcast or multicast based

video content distribution and other similar applications supporting streaming

video services that require specific network policy treatment. Video applications

relying on TCP with buffering would not be an intended use of this application

type.

video-conferencing

> Video Signaling (conditional) for use in network

topologies that require a separate policy for the video signaling than for the video

media.

video-signaling>

Video Signaling (conditional) for use in network topologies

that require a separate policy for the video signaling than for the video media.

voice

> Voice for use by dedicated IP Telephony handsets and other similar

appliances supporting interactive voice services. These devices are typically

deployed on a separate VLAN for ease of deployment and enhanced security by

Содержание MSM-6226G




























































































































































































































































Результаты поиска

Содержание MSM-6226G

Отзывы:

Похожие инструкции для MSM-6226G

Бренды по названию

Популярные бренды

ICPDAS MSM-6226G, Руководство пользователя для консоли

Результаты поиска

Содержание MSM-6226G

Отзывы:

Похожие инструкции для MSM-6226G

Бренды по названию

Популярные бренды