Single Stage Multi Position Furnace
Service Manual
2
440 08 2001 02
1. INTRODUCTION
This service manual is designed to be used in conjunction
with the installation manual and/or technical support manual
provided with each furnace.
These furnaces represent the very latest in high efficiency
gas furnace technology. Consequently, they incorporate the
use of certain controls that contain highly sophisticated elec-
tronic components which are
not user serviceable
. there-
fore, it is essential that only competent, qualified, service
personnel attempt to install, service, or maintain this prod-
uct.
This Service manual was written to assist the professional
HVAC service technician to quickly and accurately diagnose
and repair any malfunction of this product.
This service manual covers our new multi--position furnaces,
both Direct Vent (2 pipe Only), Indoor combustion (1 pipe
Only) and Dual Certified (1 or 2 pipe) models. The overall op-
eration of all of these models is essentially the same.
This manual, therefore, will deal with all subjects in a general
nature (I.E. all text will pertain to all models) unless that sub-
ject is unique to a particular model or family, in which case
it will be so indicated.
The information contained in this manual is
intended for use by a qualified service technician
who is familiar with the safety procedures required
in installation and repair and who is equipped with
the proper tools and test instruments.
Installation or repairs made by the unqualified
persons can result in hazards subjecting the
unqualified person making such repairs to the risk of
injury or electrical shock which can be serious, or
even fatal not only to them, but also to persons being
served by the equipment.
If you install or perform service on equipment, you
must assume responsibility for any bodily injury or
property damage which may result to you or others.
We will not be responsible for any injury or property
damage arising from improper installation, service
and/or service procedures.
!
2. UNIT IDENTIFICATION
The unit’s rating plate contains important information for the
service technician. It also lists the complete Model Manufac-
turing and Serial Numbers.
These complete numbers are required to obtain correct re-
placement parts (example, in certain model families a unit
having a MARKET REVISION of “C” is likely to be equipped
with one or more different components.
MODEL NUMBER IDENTIFICATION GUIDE
*
9
M P
D
0 75 B
1 2
A
1
Brand Identifier
Engineering Rev.
T = Tempstar
Denotes minor changes
C = Comfortmaker
Marketing Digit
H = Heil
Denotes minor change
A = Arcoaire
X = Evaluation
Cooling Airflow
Brand Identifier
08 = 800 CFM
8 = Non--Condensing, 80+% Gas Furnace
12 = 1200 CFM
9 = Condensing, 90+% Gas Furnace
14 = 1400 CFM
Installation Configuration
16 = 1600 CFM
UP = Upflow
DN = Downflow
UH = Upflow/Horizontal
20 = 2000 CFM
HZ = Horizontal
DH = Downflow/Horizontal
MP = Multiposition, Upflow/Downflow/Horizontal
Cabinet Width
Major Design Feature
B = 15.5
²
Wide
1 = One (Single) Pipe
N = Single Stage
F = 19.1
²
Wide
2 = Two Pipe
P = PVC Vent
J = 22.8
²
Wide
D = 1 or 2 Pipe
T = Two Stage
L = 24.5
²
Wide
L = Low NOx
V = Variable Speed
Input
(Nominal MBTUH)
