ICP GRD RD Series Скачать руководство пользователя страница 14

Страница: 14 / 93

,&RPPDQG/LQH6ZLWFKHVRI*'7;$''

The GDTX000.ADD driver can be configured with the following

command line switches. The

names of the switches are IBM OS/2 compliant. The descriptions given in brackets ([,]) are
optional. The "!" inverts the following function.

%$6('(9 *'7;$''>9@>$G@>>@'0@>>@60@>>@$0@>126&$1@>>@87@>5@

Verbose (only possible as first parameter)
Display logo/error messages on screen.

All the following options until the next /A:d
are valid for adapter d. All adapters are numbered
starting with 0.

>@'0

Switch for supporting a Direct Access
[SCSI] Device-Manager (i.e.: OS2DASD.DMD)

Support Host-Drives (Standard)

'0G

Support Host-Drive d as a hard disk
(default if no CD-ROM is present)

'0GH

Support SCSI device (Bus d, SCSI-ID e)
as a hard disk (default for SCSI type 0: DASD)

>@60

Switch for supporting a SCSI-Manager
(i.e.: OS2SCSI.DMD)

Support SCSI devices (default)

60G

Support Host-Drive d as SCSI device
(default if d is a cached CD-ROM)

60GH

Support SCSI device (Bus d, SCSI-ID e)
as SCSI device (default for all SCSI types
except 0: DASD)

>@$0

Switch for supporting an ASPI-Manager
(i.e.: OS2ASPI.DMD)

Support SCSI devices (OS2ASPI.DMD)

$0G

Support Host-Drive d as ASPI-Device

$0GH

Support SCSI device (Bus d, SCSI-ID e)
as ASPI-Device

126&$1

Scans the SCSI channels only for these devices,
which are configured through the "/DM“, „/SM“, „/AM“
or „/R“ switches.

>@87

Ignores special time-out values of a certain
application, but always uses the GDTX000.ADD
settings. Some backup programs use time-out values

that are

too short.

5GH

Reserve a SCSI device (channel d, SCSI-ID e) as a raw
device, which is directly operated through OS/2 (the
data are not cached by the GDT cache). This SCSI-
device must not be initialized with GDTSETUP
(it may need to be de-initialized).

If reciprocally exclusive options have been selected, the one set last is effective.

Содержание GRD RD Series






























































































Результаты поиска

Содержание GRD RD Series

Отзывы:

Бренды по названию

Популярные бренды

ICP GRD RD Series, Руководство пользователя

Результаты поиска

Содержание GRD RD Series

Отзывы:

Бренды по названию

Популярные бренды