ICP Electronics ROCKY-3786EV, Руководство пользователя

Страница: 46 / 69

46
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or
multiple sector read/write. If the user’s IDE hard drive supports
block mode (most new drives do), select Enabled for automatic
detection of the optimal number of block read/writes per sector
the drive can support.
The Choice: Enabled, Disabled
Onboard FDC Controller
Select Enabled if the user’s system has a floppy disk controller
(FDC) installed on the system board and the user wish to use it.
If the user install and-in FDC or the system has no floppy drive,
select Disabled in this field.
The Choice: Enabled, Disabled
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and
second serial ports.
The Choice:
3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto
UART Mode Select
Select a serial port 2 operation mode.
The Choice: Normal, IrDA, ASKIR, SCR
Onboard Parallel Port
Select an address and corresponding interrupt for the parallel
ports.
The Choice: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled
Parallel Port Mode
Select a parallel operation mode.
The Choice: SPP, EPP, ECP,ECP+EPP