ROCKY-3701 Socket 370 Celeron
TM
& Pentium III
35
1. Please, disconnect the AC cord of the Power Supply from the AC
source to prevent sudden electric surge to the board.
2. Please, check the type of your CPU board. All CPU board listed on
the next page support ATX power supply but has two types of
power switch connection:
2.1.
Type A (through Power Button & +5VSB) : ROCKY-P228BX,
ROCKY-P218A, ROCKY-P228, ROCKY-P238V, ROCKY-
538TXV, ROCKY-548TX, JUKI-710. Please, refer to this figure:
The example shown on this figure is the connection with Rocky-P218A.
Connect the ATX power switch to the pin 9 (power button) and pin 19
(+5VSB) of J1 on the board.
2.2.
Type B (through Power Button & GND) : PCISA-258EV, PCISA-
358SV
(ROCKY-528AGP, ROCKY-528AGP-100)
. Please refer
to this figure:
ROCKY-3701 Socket 370 Celeron
TM
& Pentium III
36
The example shown on this figure is the connection with PCISA-
258EV. Connect the ATX power supply switch to the pin 18 (power
button) and pin 20 (GND) of J1 on the board.
Note: for ROCKY-528AGP and ROCKY-528AGP-100, the
connection is almost the same with the above figure. The only
difference thing is the backplane. See the figure below:
2.3. ROCKY-3701 (through Power Button & +5VSB):
