WF-2572
, Ethernet to Wi-Fi Bridge (V1.00, 2018/09/30) 15
3.3.1 Wi-Fi Parameter
The Wi-Fi parameter can be divided into six types. The description of Wi-Fi parameter has shown in Table
3-1.
Table 3-1. Description of Wi-Fi Parameter
Wi-Fi Parameter
Description
Mode
The Wi-Fi role of WF-2572.
The Wi-Fi role consists of Station (Infrastructure) and AP
(Limit-AP).
SSID
Wi-Fi SSID
1.
It can set the AP’s SSID when the mode is “Limit-AP”.
2.
The SSID mean that the Wi-Fi AP which WF-2572 would
like to connect when the mode is “Infrastructure”.
* Connected devices must be with the same SSID
Operation Band
The operation band of WF-2572.
The WF-2572 supports 2.4/5 GHz.
Authentication
The encryption of WF-2572
Encryption of Wi-Fi, connected devices must with the same
encryption.
Channel
Wi-Fi transmission channel setting
CH 1~11: operation band is 2.4 GHz.
CH 36/40/44/48: operationband is 5 GHz
*The channel can change when the role is “Limit-AP”.
Password
Key of Encryption
，
connected devices must with the same
password.
*The length of password is 8~63 characters.
3.3.2 Device MAC
The device MAC must be setting when device is in the “Infrastructure” mode. If user
didn’t know device’s MAC address, the utility can use for searching device MAC. The user can
use the “Get MAC” button for searching device mac. The following step show that how to get
device MAC from utility.
Step1.
Please connect the Ethernet cable between PC and device.
Step2.
Please fill in the IP address of the device.
Step3.
The utility will display the device MAC address after clicking “Get MAC” button.
Step4.
The utility will appear a successful message when the utility get the MAC from the
device.
