Technical support:
P8
7
Self-Test
1) In the eSearch Utility
, select
the
“Modbus RTU Master”
item from the
“Tools”
menu to
open the Modbus RTU Master
Utility.
2)
In the Modbus RTU Modbus Utility, select your COM port, Baud Rate and Data
Format (e.g.
COM1/9600/N,8,1
) on the PC (Master)
and then click the “
Open
”
button in the
“COM status”
section.
3)
Refer to “
Protocol Description
” section and type the command in the
“Command”
field then click the
“Send command”
button. If the response data
is correct, it means the test is success.
Please ensure that the Timeout value in the
window should larger than 2 times the
Slave
timeout
setting in the tSH-73x module.
The Modbus command settings
depends on your Modbus device.
