Tiny Serial Port Sharer
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved.
-31 -
3.4
Serial Port Page
The
Port Settings
section provides basic information related to the hardware and software for the
tSH-700 module, including the Firmware version and the IP Address, etc. and then provides
functions allowing items such as port settings and sharer settings to be configured.
3.4.1
Port Settings
The following is an overview of the parameters contained in the
Port1
Settings
section:
Item
Description
Default
Port Settings
Baud Rate (bps)
This parameter is used to set the Baud Rate for the COM ports. 115200
Data Size (bits)
This parameter is used to set the Data Size for the COM ports.
8
Parity
This parameter is used to set the Parity for the COM ports.
None
Stop Bits (bits)
This parameter is used to set the Stop Bits for the COM ports.
1
CRC/LRC Confirm
This parameter is used to enable or disable CRC/LRC Confirm
function. This function can check every request/response in
CRC partition. If CRC partition is not correct, the command will
be skipped.
Yes = Enable; No = Disable
No
