TPD-432F-H Quick Start, version 1.1 Last Revised: Apr. 2018 - 3 -
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
4
First Use of the TPD-432F-H
1.
Connect wires as the figure. And set the rotary
switch to zero (At this point, the power is not yet
supplied).
2.
Supply power to the TPD-432F-H, wait for several
seconds and then you can see the default
program run on it.
3.
Try to touch on the icons on the screen of the
TPD-432F-H and you can find that TPD-432F-H
switches to another page.
5
Creating First Project
To create your first project of the TPD-432F-H, install the free development tool, HMIWorks
and then refer to <<TouchPAD_programming _guide.pdf>>, which can be found on the web:
http://ftp.icpdas.com/pub/cd/touchpad/document/english/programming_guide/
Use a flat-head screwdriver to
set rotary switch
External Power
GND
VDC (+12 ~ +48V)