Copyright © 2015 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
tM
-A
D
2
Q
u
ic
k
S
ta
rt
5
4
---------------------------------------------------------------------------------
Installing the DCON Utility
The DCON Utility is an easy-to-use tool designed to enable simple configuration of I/O
modules that use the DCON protocol.
Step 1: Locate the DCON Utility
The DCON Utility can be obtained from the companion CD or from the
ICPDAS FTP site:
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
CD:\Napdos\Driver\DCON_Utility
5
----------------------------------------------------------------------------------
Using the DCON Utility to Initialize the
tM-Series Module
The tM-Series is an I/O module based on the DCON protocol, meaning that you can use
the DCON Utility to easily initialize it.
Step 1: Run the DCON Utility_Pro
Double-click the DCON Utility Pro
Step 2: Use the COM1 port to communicate with the
tM-Series
Click the “COM Port” option from the menu and a dialog box will be displayed that will
allow you to set the communication parameters as described in the table below.