TPM-4100/TP-4100 Touch Panel Monitor User Manual
, version 1.0.0
,
Last Revised: June 2012 Page: 23
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
2.1.1.1. Installation for WinPAC-8000 and WinPAC-5000
Follow the steps below to install the PenMount USB touch driver.
1.
Go to CD-ROM to copy the driver to WinPAC.
PenMount_USB_TOUCH_Vyyyymmdd.CAB driver can be obtained from:
CD:\TPM-4100_TP-4100\Driver\WinCE\V5.0\WP-8000 and WP-5000
device\
Or go to “\System_Disk\External_device_driver\” in the WinPAC.
2.
Double click “PenMount_USB_TOUCH_Vyyyymmdd.CAB”
3.
Show one of two dialogs below. Just click “OK” button to continue
installation.
4.
Run the WinPAC Utility located on desktop. And click “Save and reboot”
the WinPAC.
Or
Click ”OK”
