ICP DAS USA PMDK Скачать руководство пользователя страница 2

Страница: 2 / 6

2. Follow the instructions shown on the screen and

complete the installation.

………………………………………………

- 2 -

ardware installation

Following steps below to install card:

1. Turn off computer power

2. Open the cover of computer case

3. Choose an unused PCI slot

4. Plug the PMDK card into this slot carefully and

use a screw to fix it

5. Install the cover back

6. Turn on the power supply

Start the computer and enter Windows operation

system, the system will execute the

Plug&Play

driver.

After the driver is installed, PMDK is ready for testing.

Содержание PMDK

Страница 1: ...d and some optional cables and daughter board One software installation CD 2010 1 26 or newer e Quick Start Guide this document On Install Windows drivers 2 1 Please execute PMDKsetup exe which is locate in CD PMDK setup WinXP PMDKsetup exe This windows driver only support Windows XP NT version ...

Страница 2: ...omputer power 2 Open the cover of computer case 3 Choose an unused PCI slot 4 Plug the PMDK card into this slot carefully and use a screw to fix it 5 Install the cover back 6 Turn on the power supply Start the computer and enter Windows operation system the system will execute the Plug Play driver After the driver is installed PMDK is ready for testing ...

Страница 4: ...rs are not wired to the PMDK card users can test the read write of DPRAM CMD code 0x2504 is used to clear LP logical position and EP encoder position Press Exec CMD button while CMD code 0x2504 to test if the action is OK or not Fig 1 4 ...

Страница 5: ... DA value and measure the output at the daughter board to verify the DA function The steps are as follows a set the DA2 to be 2 b write 0x2505 to CMD code c press Exec CMD button Use a voltage meter to check if the DA2 is outputting around 2 0 Volt Fig 2 5 ...