Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]
2
1
Mounting the Hardware
The PMD can be mounted on a panel of maximum thickness 5 mm.
Adequate access space can be available at the rear of the instrument panel
for wiring and servicing purposes.
To ensure proper ventilation for your PMD,
leave a minimum of 50 mm space between the top
and bottom edges of the PMD and the enclosure
panels.
1) Prepare the panel and cut the hole to the
specified size. The table below shows the
dimension of the panel cut-out of PMD.
Models
Depth
PMD-220x
44 mm
PMD-420x
54 mm
Models
Panel Cut-Out (Width x Height)
PMD-220x
197 mm x 133 mm, + 1 mm
PMD-420x
277 mm x 215 mm, + 1 mm
