ICP DAS USA PMC series Скачать руководство пользователя страница 120

Страница: 120 / 340

ICP DAS PMC/PMD Series User Manual

107

The settings are as below:



Nickname

：

For user to define nickname for each I/O channel,

this nickname will be displayed on the “I/O Information” and
“Rule Setting” pages.



Type: Select the input signal type of the AI channel from the

dropdown list.



Deadband: Please refer to Deadband section in the “

7.2.3

XW-Board AI Channel Settings

” for more detailed information.



Scale: Please refer to Scale section in the “

7.2.3

XW-Board/XV-Board AI Channel Settings

” for more detailed

information.

After all settings are completed, click “OK” button to save the

changes and return to Modbus RTU Module List.



The AO channel setting for M-7000 module

The M-7000 module AO channel setting interface is shown as

below (using M-7024 as an example)

Figure7-41 :

M-7000 AO Channel Setting Page

The settings are as below:



Nickname

：

For user to define nickname for each I/O channel,

this nickname will be displayed on the “I/O Information” and
“Rule Setting” pages.

Содержание PMC series





















































































































































































































































































































































Результаты поиска

Содержание PMC series

Отзывы:

ICP DAS USA PMC series, Руководство пользователя, Страница: 120 / 340

Результаты поиска

Содержание PMC series

Отзывы: