ICP DAS USA PMC series, Руководство пользователя, Страница: 106 / 340

ICP DAS PMC/PMD Series User Manual
93
 DI Status Mapping: When “DI Status Mapping” is selected,
the status of the DI channel with the same channel number on
the XW-Board will be copied to the DO channel. For example,
when the “DI Status Mapping” is enabled on DO0, when the
DI0 status is ON, DO0 will set to be ON, and when the DI0
status is OFF, DO0 will set to be OFF as well.
After all settings of the channels are completed, click “OK” button to
return to XW-Board/XV-Board Setting page.
7.2.3 XW-Board/XV-Board AI Channel Settings
The XW-Board/XV-Board AI Channel Setting page is shown as follow
(using PMC-5151+XW310C as an example):
Figure7-21 : XW-Board AI attribute setting page
The settings are as follow:

Nickname
：
For user to define nicknames for each I/O channel,
this nickname will be displayed on the “I/O Information” and
“Rule Setting” pages.

Type: Select the input signal type of the AI channel from the
dropdown list.
 Scale: In the “Scale” field, AI channel raw data can be set to
operate with linear proportion between “MIN” and “MAX” values.