ICP DAS USA PMC-523 Series Скачать руководство пользователя

Страница: 97 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual

Figure7-15 :

PM-3133 Setting Page

The settings are as follow:



Nickname

：

For user to define nicknames for each power meter,

this nickname will be displayed on the “Power Meter
Information” and “Rule Setting” pages.



Description: The Description field provides a space for the user

to make a brief description of this power meter.



Address: The address will be the Modbus address of this

Modbus RTU power meter, please make sure the address setting

is the same as the settings of the module, if the setting is not

accurate, the connection for PMC/PMD to the power meter will

be failed.



Scan Rate: Input the time interval for PMC/PMD to periodically

retrieve the power data of this Modbus RTU Power Meter, the

setting range will be 0 ~ 65535 seconds.



Polling Timeout: The time interval for PMC/PMD to send

command to the Modbus RTU Power Meter and wait for the

response, the unit will be ms. The setting range will be 1-10000

ms.



Retry Interval: The time interval to wait for PMC/PMD to

repeatedly send command again when PMC/PMD sends

command to the Modbus RTU Power Meter and get no response.

The unit will be second. the setting range will be 3 ~ 65535

Содержание PMC-523 Series




























































































































































































































































































































































Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды

ICP DAS USA PMC-523 Series, Руководство пользователя

Результаты поиска

Содержание PMC-523 Series

Отзывы:

Похожие инструкции для PMC-523 Series

Бренды по названию

Популярные бренды