ICP DAS PMC-5141 User Manual
http://www.icpdas.com
10
COM Port Setting
After getting into COM Port Setting page, it will automatically read and
display current COM Port Setting on PMC-5141. To modify the COM Port
Setting, please input Baudrate, Stop bit and Timeout (greater than 600ms is
recommended), and then click on “Save” button to save the changes.
Figure 5-7: COM Port Setting
Please Note:
1.
PM-213x series product does not support 115200 Baudrate, if you
intend to use PM-213x and PM-31xx at the same time, please do not set
Baudrate to be 115200.
2.
After you finish modifying COM Port settings, please go to “Power
Metter” page and perform “Scan” again to renew the latest power meter
information and make sure the settings of COM Port is the same as the
settings of power meters (such as Baudrate settings). If the settings
don’t match each other, it might result in failing to scan power meters
or getting the wrong power meter information.
