ICP DAS USA PISO-CAN200 Скачать руководство пользователя страница 77

Страница: 77 / 90

Add Button:

User can key in the CAN message into the text boxes above

the transmission list. Then click add button to insert this CAN message into

transmission list. The transmission list can include maximum 20 CAN

messages. After adding the message into transmission list, users can send

this message to CAN network by using Send button.

Modify Button:

If users want to modify the content of some CAN message

in the transmission list, select this CAN messages in the transmission list firstly.

Then, this CAN message information will be shown in the text boxes above the

transmission list. Users can modify the CAN message in these text boxes

directly. Finally, click Modify button to save the modification in the transmission

list.

Delete Button:

If some CAN message in the transmission list is useless,

users can select it and click delete button to delete this CAN message from

transmission list.

Send Button:

After users select one CAN message from transmission list,

click Send button to send this CAN message once from the selected CAN port.

If the timer parameter of this CAN message is not 0, the CAN message will be

send depending on this timer parameter periodically. In this case, the status

filed of this CAN message in transmission list will display “Running”, and the

text shown on the Send button will be changed to “Pause”. If uses want to stop

the message transmission, click this button again. There are only 5 CAN

message can be sending cyclically from one CAN port at the same time.

PISO-CAN/PEX-CAN/PCM-CAN Series User’s Manual (v2.6 Dec/2013) -------

ГК

Атлант

Инжиниринг

–

официальный

представитель

РФ

СНГ

+7(495)109-02-08 [email protected] www.bbrc.ru

Содержание PISO-CAN200



























































































Результаты поиска

Содержание PISO-CAN200

Отзывы:

Похожие инструкции для PISO-CAN200

Бренды по названию

Популярные бренды

ICP DAS USA PISO-CAN200, Руководство пользователя

Результаты поиска

Содержание PISO-CAN200

Отзывы:

Похожие инструкции для PISO-CAN200

Бренды по названию

Популярные бренды