PISO-725 Quick Start Guide
ICP DAS CO., LTD.
3
WebSite: http:// www.icpdas.com.tw E-Mail: [email protected] , [email protected]
Please make sure jumper is kept in default setting before self-test.
Channel
Signal Name
Pin Assignment
Jumper
(0+, 0-)
(DIA0,DIB0)
(12,30)
JA1 & JB1
(1+, 1-)
(DIA1,DIB1)
(13,31)
JA2 & JB2
(2+, 2-)
(DIA2,DIB2)
(14,32)
JA3 & JB3
(3+, 3-)
(DIA3,DIB3)
(15,33)
JA4 & JB4
(4+, 4-)
(DIA4,DIB4)
(16,34)
JA5 & JB5
(5+, 5-)
(DIA5,DIB5)
(17,35)
JA6 & JB6
(6+, 6-)
(DIA6,DIB6)
(18,36)
JA7 & JB7
(7+, 7-)
(DIA7,DIB7)
(19,37)
JA8 & JB8
Isolated Digital Input
Non-isolated Digital Input
Default Setting
Step 1:
Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI slot.
Step 4: Carefully insert your I/O card into the PCI slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Hardware on PC
