Firmware Update via 7188XW.exe (Ver. 1.0/Sep. 2018)
Page:
1
1.
Setting up the PDS-220Fx
Before updating the firmware, please ensure that the PDS-220Fx series module is connected with
your host computer. Refer to the following steps for the details.
Step 1:
Switch off
the Power to the PDS-200Fx module.
Step 2: Connect the COM1 (RS-232) connector on PDS-220Fx to COM Port on host PC using
the
CA-0910N cable.
Note: CA-0910N is a 3-wire Null-Modem cable (optional).
Front Panel
Host PC
COM1
RS-232
COM2
RS-485/422
CA-0910N Cable