SW1 Card ID Setting
JP1: Analog Input Type Selection.
(Please make sure JP1 jumper is kept in default setting before self-test.)
Follow these steps:
1.
Shut down and power off your computer.
2.
Remove the cover from the computer.
3.
Select an unused PCI slot.
4.
Carefully insert your I/O card into the PCI slot.
5.
Replace the PC cover.
6.
Power on the computer.
After powering-on the computer, please finish the Plug&Play
steps according to the prompted messages.
3
PCI-1800/1802 LU/HU Quick Start Guide
Installing Hardware on PC
Card ID
1
ID0
2
ID1
3
ID2
4
ID3
(*)
0
OFF
OFF
OFF
OFF
ON
OFF OFF OFF
1
OFF
ON
OFF
OFF
2
:
:
:
:
:
ON
OFF
ON ON
13
OFF
ON ON ON
14
ON ON ON ON
15
(*) Default setting
(Default Setting)