- 2 -
………………………………………………
I/O Base Address & Jumper Setting
¾
The base address is set from SW1 DIP switch on
board:
¾
JP3
IRQ selection
………………………………………………
Installing Hardware on PC
Follow those steps:
1.
Shut down and power off your computer
2. Remove all covers from the computer
3. Select an empty ISA slot
4. Carefully insert your I/O card into the ISA slot
5. Replace the PC covers
6. Power on the computer
After powering-on the computer, continue next process.
3
4
ON
1 2 3 4 5 6
SW1: Base Address
Address 1 2 3 4 5 6
*0x200
ON
ON
ON
ON
ON
ON
0x208 ON ON ON ON ON OFF
0x210 ON ON ON ON OFF
ON
0x218 ON ON ON ON OFF
OFF
0x220 ON ON ON OFF ON ON
0x228 ON ON ON OFF ON OFF
: : : : : : :
0x2C0 ON OFF OFF
ON ON ON
0x2C8 ON OFF OFF
ON ON OFF
: : : : : : :
0x300 OFF ON ON ON ON ON
0x308 OFF ON ON ON ON OFF
: : : : : : :
* Default Base Address: 0x200
N.C 15 14 12 11 10 9 7 6 5 4 3 N.C
*Default IRQ: N.C (Not use IRQ)