![background image](http://html1.mh-extra.com/html/icp-das-usa/ins-316/ins-316_user-manual_3554946038.webp)
iNS-316 User Manual
Copyright
©
2022 ICP DAS CO., Ltd. All Rights Reserved.
- 38 -
The table describes the parameters contained in the
"Function"
section.
4.11.2 SNMP Specific Trap
The table describes the parameters contained in the
"Specific Trap”
section
Item
Description
Defaults
Read-Only Community
Set the community name of the module for read-only data
public
Read-Write Community Set the community name of the module for read-write data
private
Trap Community
Set the community name of the module for the trap
public
Manager / Trap IP #1
Set the IP address of Trap IP #1
0.0.0.0
Manager / Trap IP #2
Set the IP address of Trap IP #2
0.0.0.0
Generic Trap
Select to enable the Cold Start or Warm Start function
Disabled
Enable SNMP
Select the box to enable the SNMP communication function
and deselect to disable it
Disabled
Update Settings
After saving the settings, also reboot the module to take effect
Item
Description
Defaults
PoE Status Change
Each PoE Port has a specific Trap. Check the box to enable
the Trap function for that PoE Port Enable Change.
Disabled
Link Status Change
Each Port has a specific Trap. Check the box to enable the
Trap function for that Port Link Change.
Disabled
Specific ID (1-255)
Specific ID is the ID number set for individual channel
1
Update Settings
After saving the settings, reboot the module to take effect