![background image](http://html2.mh-extra.com/html/icp-das-usa/icam-771/icam-771_user-manual_3546237077.webp)
Chapter 4
iCAM-7
60D User’s Manual ICP DAS
Setup
77
4.4.3 Snapshot Tab
The Snapshot
tabbed pane sets the Camera to take snapshot images when event
is triggered. The four methods available for selection are Always, Schedule,
Motion, and GPIO Input, each of which can be set up with user scheduled time
and capture interval, as well as defining the snapshot file target destination.
Always:
Under this method, the Camera automatically continuous to capture
snapshots of the area under surveillance at every 1, 2 or 3 seconds
interval. The stream of accumulated snapshots may be stored in the
SD Card, Remote Disk, sent to host by E-mail, FTP as preferred or
through all of them.
Snapshot is triggered at every
1, 2 or 3 seconds interval.