P2
1
Switch to Init Mode
Before attempting to configure the module,
ensure that you move the switch to the
“
Init
”
position, or connect the Init pin to the
GND pin and then power on the module to
access the configuration mode.
2
Connect to the PC and the Power Supply
Note:
You should only connect a single I-7000/M-7000 module to the
RS-485 bus during the configuration process.
1) Using an RS-232 to RS-485 Converter
2) Using a USB to RS-485 Converter
Power Supply (+24v, GND)
USB
(+Vs, GND)
I-7000/M-7000
RS-485
( Data+, Data- )
I-7561U/tM-7561
INIT
GND
RS-232
Power Supply (+24v, GND)
I-7000/M-7000
(+Vs, GND)
RS-485
( Data+, Data- )
I-7520/tM-7520U
