P3
Switch on power and execute the TwinCAT System Manager (Config mode)
3
Wiring to the Connector
Wiring Tip
Connecting the wire
Removing the wire
1. I/O Devices
Right click
Scan Devices…
2.
Click
“OK”
button
3.
Choose the correct network
device which is connected to
ECAT Module and click
“OK”
button
4.
Click
“OK”
to start scanning
Click
“OK”
to activate the free
run mode for TwinCAT system
manager
5.
In the left-hand window,
ECAT Module
is now shown in the
TwinCAT system Manager
Use the blade of a
flat-head screwdriver
to push the wire
clamp, then hold until
step 2 complete.
Insert
the
wire
Use the blade of a
flat-head screwdriver
to push the wire clamp,
then hold until step 2
complete.
Remove
the
wire