P3
3 Configure DNP3 Slave
Step1. Click the tab page of configured slave.
Step2. Select connection mode (TCP, UDP and Serial).
Step3. Input IP address or select Com port follow the connection
mode.
Step4. Input DNP3 slave ID, can’t be the same as the DNP3
master.
Step5. Click “Set” button to start the I/O configure.
4 DNP3 Slave I/O Configure
Step1. Select the I/O Type or Group_Variation (I/O Type and
Group_Variation are linkage settings).
Step2. Input start channel index in “Start Index” of the I/O.
Step3. Input I/O amount in “Amount” of the I/O to be monitored.
Step4. Select output mode if the I/O Type is output I/O.
Step5. If necessary, you can fill in some user-friendly
annotations in the “Description” field.
Step6. Click “Add” button to add a new I/O configuration field.