Firmware Update via 7188XW.exe (Ver. 1.1/Aug. 2018)
Page:
1
1.
Setting up the PDS-700
Before updating the firmware, please ensure that the PDS-700 module is connected with your host
computer. Refer to the following steps for the details.
Step 1:
Switch off
the Power to the PDS-700 module.
Step 2: Connect the DB-9 connector of CA-0910 download cable to your host computer.
Step 3: Wire the CA-0910 to PDS-700 module, as follows:
3-1: Connect the
CA-0910.TX
with
PDS.700.TxD1
3-2: Connect the
CA-0910.RX
with
PDS.700.RxD1
3-3: Connect the
CA-0910.GND
with
PDS.700.GND
Vs+
GND
