Icop PDX-057T-D5A, Руководство пользователя

Страница: 25 / 29

PDX-057T
DM&P Vortex86DX

Panel PC with 5.7” VGA TFT LCD
20
3.1. PDX-057T Development Note
<Primary /Secondary IDE: Master or Slave>
Micro SD: Primary Master
CF Slot: Secondary IDE: Master or Slave (User can use slide switch (in side of CF
slot) to adjust Master or Slave
<Window CE6.0 development guide>
Windows Embedded CE 6.0 BSP, trial CE image and development notes, please visit
Vortex86DX CPU website to get more information:
http://www.dmp.com.tw/tech/vortex86dx/
<Linux installation note>
Please forced the IDE setting in BIOS to PIO mode before install Linux
on PDX-057T as follows:
1-Go to the advanced BIOS setting and make the “Onboard IDE Operate Mode” is
“Legacy Mode”
2-Go to the PCI/PnP and make the “PCI IDE BusMaster” is “Disable"
< XP professional /Home /Embedded and Windows 2000 installation note >
1-Please visit Vortex86DX CPU website to get more information:
http://www.dmp.com.tw/tech/vortex86dx/
2-Go to the Advanced and make "Onboard IDE operate Mode" "Native mode"
3-If your CF Card support UDMA2/4, please Go to the PCI PnP and make the “PCI
IDE BusMaster” is “Enable”
<Enhance CF to run the UDMA2/4>
1-Make sure the CF Card is supporting UDMA 2/4 Mode or not.
2-Go to the PCI/PnP and make the “PCI IDE BusMaster” is “Enable”
<How to boot up from the Micro SD card>
1-Get into the BIOS setup Utility
2-Go to the Advanced
3-Choose Primary IDE Pin Select: SD card
4-Press “F10” to save configuration changes and exit setup
<Backlight On/Off through GPIO control>
Sample Code: