ICOP Technology PPC-090T-PD2N5NG5CGP, Руководство пользователя

Страница: 18 / 48

PPC-090T User’s Manual
IUMPPC090T-01 Ver.1.12A Aug, 2021
12
1.5 Panel Mounting Instruction
1. Cut a mounting hole in the panel. (Refer to PPC
‐
090T Dimensions on page
11~12.) (Note 1)
2. Check and remove the twelve M3 screws in a diagonal pattern as image below if
necessary.
3. Place PPC
‐
090T face
‐
down on a clean, flat surface.
4. Slide the panel cutout around the back of PPC
‐
090T, until the panel rests
directly on the gasket. Make sure the screw holes align with the screw holes on
PPC
‐
090T.
5. The screw size is M3*L (L=wall thi 6.0mm) (Note 2)
6. Insert all twelve M3 screws into the screw holes. (Note 2)
7. Finger-tighten the M3 screws. Finish tightening the M3 screws in a diagonal
pattern using an M3 screw driver (see the image as below); maximum torque
0.44Nm (4.5 kgf
‐
cm).