ii
PDX3-090T DM&P Vortex86DX3 Panel PC with 9” WSVGA TFT LCD
Copyright
The information in this manual is subject to change without notice for
continuous improvement in the product. All rights are reserved. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this
document. And makes no commitment to update or to keep current the
information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted,
in whole or in part, in any form or by any means without the prior written
permission of the ICOP Technology Inc.
Copyright 2021 ICOP Technology Inc.
Manual No. IUMPDX3090-01 Ver.1.3A Aug, 2021
Trademarks Acknowledgment
Vortex86DX3
is the registered trademark of DMP Electronics Inc. Other
brand names or product names appearing in this document are the properties and
registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
Safety Information
Read these Safety instructions carefully.
Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
Do not expose your Panel PC to rain or moisture, in order to prevent shock
and fire hazard.
Keep PDX3-090T away from humidity.
Do not open the cabinet to avoid electrical shock. Refer to your nearest
dealer for qualified personnel servicing.
Never touch un-insulated terminals or wire unless your power adaptor is
disconnected.
Locate your Panel PC as close as possible to the socket outline for easy access
and to avoid force caused by entangling of your arms with surrounding cables
from the Panel PC.
USB connectors are not supplied with Limited Power Sources.
If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient overvoltage.
D
O NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS
(E
NCASING
)
OF THIS
PRODUCT
.
P
LEASE CONTACT YOUR DEALER FOR SERVICING FROM QUALIFIED TECHNICIAN
.
