INTRODUCTION
Congratulations on your purchase of a Renkus-Heinz Iconyx Steerable Column Loudspeaker. We hope you enjoy it.
Your Iconyx Steerable Column Loudspeaker was carefully tested and inspected before leaving our factory and should have arrived in
perfect condition. Please carefully inspect the shipping carton(s) and loudspeaker(s) for any noticeable damage, and if any damage
is found, immediately notify the shipping company.
Only you, the consignee, may institute a claim with the carrier for any damage incurred during shipping. Be sure to save the car-
ton(s) and all packing material for the carrier’s inspection.
It is also a good idea to save the carton and packing material even though the loudspeaker arrived in good condition. If you should
ever need to ship the loudspeaker, it should be shipped in its original factory packaging.
GENERAL INFORMATION
To simplify shipping and handling, ICONYX arrays are constructed from 8-channel or 16-channel modules and need to be assembled
in the field. The assembly hardware is packed with the modules in cardboard box(es) that double as carton “fillers”. The ones con-
taining the hardware are marked “Hardware” to prevent their being accidently discarded.
If you purchased an
IC8A
or
IC16/8A
, all you need to do is remove the column loudspeaker and its hardware box from the carton
and install it. Skip to page 9 for Address Number Verification instructions.
If you purchased an
IC16A
or an
IC32/16A
, you should have received two cartons (two 8-channel or 2-16 channel modules) and will
need to assemble them into a 16- or 32-channel unit. Each carton will include a hardware box, but if you purchased an IC16A only
the box in carton 1 will include hardware; the box in carton 2 will be empty. If you purchased an IC32/16A, both boxes will include
hardware.
If you purchased an
IC24A
, you should have received 3 cartons (three 8-channel modules). The hardware boxes in cartons 1 and 2
will include hardware, while the box in carton 3 will be empty.
If you purchased an
IC32A
, you should have received 4 cartons (four 8-channel modules) and will need to assemble them. The
hardware boxes in cartons 1, 2 and 3 will include hardware; the box in carton 4 will be empty.
A detailed listing of the hardware supplied with each model follows on the next page. The cartons will be marked to show the mod-
ules’ position in the finished column array; for example, top, bottom, center, etc.
In all cases, if you ordered a mounting hinge kit with the loudspeaker the female portions of the hinge assemblies will have been
installed on the modules for you. The male portions of the wall mounting hinge assemblies will be packed in the hardware box(es). A
dimensional drawing of the column array and paper mounting templates were included in the plastic bag that contained this manual.
Note that the male sections have been set up to allow the column to swing to the right away from the wall. If you want the column to
swing to the left, you will need to change the location of the hinges from the right side of the wall mounting plate to the left side.
Refer to the Installation section of this manual for more information.
4
Owners Manual