manualshive.com logo in svg

iConyx IC-R-II Series, Руководство пользователя

Поделиться
Скачать
iConyx IC-R-II Series Скачать руководство пользователя страница 62

Users Manual 

                 

IC-R-II

62

APPENDIX V: USING THIRD PARTY CONTROLLERS 

 

 

Operating Iconyx IC-R-II Digitally Steerable Arrays with External 

Controllers 

 

IC-R-II digitally steerable arrays include a RS485 port for communication 

to and from external third party control devices, such as those made by 

Crestron.  This allows these third party devices to control IC-R-II arrays 

just as you control them from your computer., Functions that can be 

controlled from these devices include system monitoring, preset selec-

tion, power and level control. The RHAON software contains a RS485 

Manager module for enabling and disabling the RS485 control mode on 

these arrays.

To open the RS485 Manager control window, select RS485 Manager 

from the Help pull down menu in RHAON. See graphic.

When the RS485 Manager dialog window opens, click on Scan to scan 

the Ethernett network for IC-R-II arrays.  Then use the drop down arrow 

to open a list of the arrays found on the network and select the array 

you want to switch over to RS485 control mode. 

To switch the selected array to RS485 mode, click on the Switch Device 

to RS485 Mode button.. This will transfer control of the array from your 

computer to the RS485 control device. . 

Be aware that once switched, the RS485 device is now in control of the 

array and not your computer. While some basic commands can still be 

accomplished using your computer and RHAON, most commands and 

system monitoring are now unavailable to your computer unless and 

until the remote device transfers control back to your computer or you 

use your computer to disable the RS485 mode on the array.

Note that in multi-module arrays, such as the IC16-R-II, IC24-R-II and 

IC32-R-II all modules are now under control of the RS485 device.

Important Installation Instructions

It is important that the RHAON network be installed first and system 

commissioning (EQ, beam steering, etc.) completed before the serial 

RS485 line is connected to the devices.

WARNING: Connecting an RS485 network to your devices before 

completing their setup in RHAON will result in anomalies in both 

operation of your devices and how they appear in software.

Содержание IC-R-II Series

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды