Using the TouchScreen
7
Arm Night Mode
The Arm Night mode, is used when everyone is going to bed.
This mode works the same as Arm Stay except that there is no Entry Delay period. If an entry/exit zone is
opened, an alarm sounds immediately.
Note:
There is still an Exit Delay period that works the same as in Arm Stay mode.
Arming and Disarming the System
The Security status of your security system is displayed in the Security Status header.
Message the Security Status header displays when the
status is “Disarmed”.
Tap to arm the system.
Message the Security Status header displays when the
status is “Armed”.
Tap to disarm the system.
Arming the System from the TouchScreen
To arm the system from the TouchScreen:
1. Tap the Security Status header when it is in Disarmed state.
The Security Options screen is displayed with a keypad and the Arm System tab open.
2. Tap an arming mode (Arm Stay, Arm Away, or Arm Night) and enter your security code.
3. The Security Status header changes to display a countdown message.
The text of the message will vary, depending on which arming mode you selected.
