iConnectivity iConnectMIDI2+, Руководство пользователя

Страница: 20 / 42

Port Routing: understanding
iConnectMIDI
2+ MIDI
The iConnectMIDI 2+ has four physical sets of I/O jacks (two bidirectional USB Device Jacks
plus two pairs of standard MIDI 5-pin DIN I/Os). Inside the unit each MIDI DIN pair has its
own 16-channel MIDI Port, and each USB Device Jack has its own set of four 16-channel
MIDI Ports.
Any Port associated with one jack may be routed to any or all of the Ports in another jack’s
set in the iConfig software. To be more precise, each possible Port routing is either enabled
or disabled in the grid in the iConfig software’s Port Routing screen discussed below.
Important : The factory default set-up is as follows.
MIDI DIN ports: routed to each other.
USB Device ports:
Port 1 – DIN 1
Port 2 – Din 2
Port 3 – the other USB device port (to allow routing between computer devices connected
to both ports)
Port 4 – free.
This routing can be changed in the iConfig software or recalled by a factory reset (see the
section on the iConnectMIDI
2+ hardware).
20