HD-RH1 User Manual
Operation
15
Select a Scene File
There are three scene file locations – A, B, & C – for storing settings. Parameters are stored
in the currently selected/active scene file.
NOTES:
•
If a feature setting is changed, the new setting replaces the setting stored in the
scene file.
•
When the scene file is switched, the settings are immediately loaded from the values
stored in the newly active scene file.
To select a scene file using the front panel
1.
Press and hold the
FILE
button on the front panel to cycle through the options.
2.
When the LED next to the desired letter is lit, release the button.
NOTE:
The scene file is not selected until the button is released.
Electronic Level Control (ELC)
The ELC button on the front panel can be used to manually adjust the Gain or Shutter. When
the Level LED is illuminated the ELC exposure can be manually adjusted using the
Level/Gain knob. When the LED is not illuminated the knob is only active if the
Gain
MODE
is set to
MANUAL
in the Gain Menu.
Electronic shutter and gain can be adjusted by either the menu or by the use of the ELC
button and Level/Gain knob on the front panel. See
Gain Menu
and
Shutter Menu
sections for
more information on menu parameter adjustments.
IMPORTANT
ELC and Manual gain cannot be used at the same time. If the user turns one of the two on,
the other will automatically be deactivated.
Electronic Level
Control Button
Level/Gain
Knob
The front panel
FILE
button can
switch among the scene files as
needed.
