iMap V-gig software panel
TM
Select the mode at the pull down manual according to the software that you
are using.
Fixed setting with Vandal VST
Fixed setting with GTR VST
Select the CC number from the list
User self defined control setting from the Channel number
/ CC value / Note value and program number for V-gig.
Select CC number, note value or program number to the controls under User
Defined mode.
Select your desired MIDI channel from 1-16 for the controls
Dependant on which mode you have selected, different control values are
available for assigning to the controller
Mode select pull down menu
Vandal mode :
GTR mode :
Mackie Control mode :
User Define mode :
User defined pull down menu
Assign the MIDI channels to the controls
Assign the control value to the controls
Tips: Please refer to the
“
Controls Chart
”
on P.21 for the control settings of Vandal and
GTR mode.
You may set the 12-foot switches and the 2-pedals on V-gig with your own
preferred settings. To do that, simply click a control such as a footswitch on
the iMap control panel (it will turn blue) and make your selection accordingly
by using the instructions below.
