Rear Panel
Line inputs 1-8
These are balanced analog inputs on standard 1/4″ TS connectors at
–10dB line level.
Line outputs 1-6
These are balanced analog outputs on standard 1/4″ TS connectors at
+6dBU line level.
S/PDIF coaxial I/O connectors
S/PDIF digital input and output on coaxial RCA connectors. The digital
input is selected via the Umix 1008 Satellite's software control panel,
while the digital output will be sent to the coaxial.
MIDI I/O connectors
MIDI input and output on standard 5-pin DIN connectors
USB 2.0 Connector
Connect it with the provided USB cable to your Mac/PC's USB connector.
Your Mac/PC must have a USB2.0 connector in order to run the full speed
of Umix 1008 Satellite.
12V/3A power adaptor (optional)
Connect the provided power adaptor here.
(Note: Umix 1008 Satellite is not able to work without the provided power
adaptor connected. The USB bus power is not able to provide sufficient
power supply for Umix 1008 Satellite.)
1
2
3
4
5
6
4
3
2
1
5
6
4
Side Panel
1
Signal and power connectors to Qcon (As audio interface plug-in to Qcon)
Connect Qcon's corresponding cables to these connectors to provide power and
signal to the Umix 1008 Satellite.
1
