9
Specifications
Transducer type .......................................................................electrostatic
Operating principle ..................................................................presure gradient
The diaphragms active diameter .............................................26 mm
Frequency range .....................................................................20 Hz to 20 kHz
Polar pattern ............................................................................unidirectional,cardioid
Sensitivity at 1 kHz into 1000 Ω load
.......................................
33 mV/Pa
Output impedance ...................................................................
50 Ω
Rated load impedance.............................................................
1000 Ω
Suggested load impedance .....................................................
> 250 Ω
Maximum SPL for 0,5% THD at 1000 Ω load
..........................134 dB
S/N Ratio DIN/IEC 651 A-weighten
.........................................83.2 dB-A
Equivalent noise level DIN/IEC A-weighten
...........................10.5 dB-A
microphone preamplifier
..........................................................123.5 dB
Phantom powering voltage on pin 2&3 of XLR ........................
+48V (+/-4V))
Current consumption ............................................................< 3mA
Output connector .....................................................................3-pin XLR male
Dimension................................................................................118mmX78mmX149mm
Weight .....................................................................................0.77kg
Pad ..........................................................................................no
HPF .........................................................................................n