18
HOW TO SET UP THE CONSOLE
Before using the treadmill for the first time, set up the
console.
1. Connect to your wireless network.
Note: In order to access the Internet, download
iFit workouts, and use several other features of
the console, you must be connected to a wireless
network. See HOW TO USE THE WIRELESS
NETWORK MODE on page 26 to connect the con-
sole to your wireless network.
2. Check for firmware updates.
First, see step 1 on page 24 and step 2 on page 25
and select the maintenance mode. Then, see step
3 on page 25 and check for firmware updates.
3. Calibrate the incline system.
Press the 1 Step Incline/Decline button numbered
-3. Then, adjust the incline to the level desired.
IMPORTANT: To avoid damaging the treadmill,
adjust the incline to zero before you fold the
treadmill.
4. Create an iFit account.
Touch the globe button near the lower-left corner of
the screen and touch the iFit button.
Note: For information about navigating in the
browser, see page 27. The browser will open to
the iFit.com home page. Follow the prompts on the
website to sign up for your iFit membership.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode,
see page 19.
To use an
onboard workout,
see page 21.
To use a set-a-goal
workout,
see page 22.
To use an iFit workout,
see
page 23.
To use the equipment settings mode,
see page 24.
To use the maintenance mode,
see page 25.
To use
the wireless network mode,
see page 26.
To use
the sound system,
see page 26.
To use the Internet
browser,
see page 27.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 30).
