7
STEP 4
Pull the handlebar wire(25) out of the hole of upright post
post (17) ,then Put the handlebar (24) onto the upright post
(17) by using washer (23) and inner hex bolt(21)&spring
washer(22) , then cover with the handlebar chuck cover
(20).
STEP 5
Connect the Handlebar wire (25) and the Extended Wire(15)
to the wires of the computer(29), then attach the computer
(29) onto the computer bracket of the upright post (17)with
the screw (27).
STEP 6
Assemble the horizontal post(36) to the saddle post (31)
and fasten the flat washer (33) & pop pin nut(32), and then
insert the saddle (37) to the post of the horizontal post(36)
and fasten it .
Insert the saddle post(31) which fixed with the saddle (37)
into the post of the main frame(1), and adjust the length
then tighten them with the pop pin knob(30).
Now, your machine is ready for use.
