
7
Rear Panel
3
4
2
1
5
1. USB 2.0 connector
Connect it with the provided USB cable to your Mac/PC/iOS device camera kit’s
USB connector. Your Mac/PC must have a USB2.0 connector in order to run the
full speed of MobileU mini-VST.
2. HI-Z input
This is a high impedance input for guitar/bass.
3. Line outputs L/R
These are unbalanced analog outputs on standard 1/4″ TS connectors at +6dBU
line level.
4. Stereo output L/R
This is an unbalanced analog output on a standard 3.5mm stereo connector.
5. Power supply connector
MobileU mini-VST is USB bus powered. If your computer does not supply
sufficient power, connect an ICON +5VDC power supply adapter to this jack or
use a standard phone charger/power adapter with the correct USB cable.
(
Note:
You can get the power adapter from ICON Distributors/dealers near you.)